TIMco Multi-Fix bolt is a heavy duty non-expansion anchor. That has a unqiue patented concave thread design which taps its own thread and provides rapid, low torque installation with exceptional pull-out resistance.
Hex Head - New solution for heavy duty anchoring into concrete, brick, stone, wood a..
£1.61
Ex Tax:£1.34
Using the most modern manufacturing methods and design techniques, the C2 is a revolutionary high performance multi-purpose screw. Designed to give ultimate performance in a multitude of materials, the patented twin-cut point gives a consistent and rapid "pick-up" and reduces timber splitting. These..
£9.90
Ex Tax:£8.25
Round Wire Nail - Galvanised 50x2.65 1kg..
£6.36
Ex Tax:£5.30
A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread l..
£0.54
Ex Tax:£0.45
Size (mm) 40 x 2.36
Finish/Colour Galvanised
Box/Pack Qty 25..
£6.48
Ex Tax:£5.40
A traditional twin-thread woodscrew with single lead start for a fast installation. Mainly used in soft timber applications or masonry with a plastic plug. NOTE: Partially threaded.
• Double countersunk head reduces the likelihood of head shear and assists completion of countersinking
• Partially th..
£9.61
Ex Tax:£8.01
Double Countersunk Hardened Twin Threaded Woodscrews plated in Zinc. The twin thread allows for a faster insertion and greater pull out resistance.
Pozi Recess Head - The pozi recess, double countersunk head reduces the likelihood of head shear and assists completion of countersinking.
Twin Thread -..
£9.55
Ex Tax:£7.96
Wide headed, galvanised nails for fixing Roofing Felt. Recommended gap between nails is 50mm...
£6.29
Ex Tax:£5.24
Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray test, this screw is ideal for external applications.
• 8mm hex head countersunk with a fixed was..
£41.50
Ex Tax:£34.58
pack of 4 6.7 x 150 hex head exterior ..
£3.42
Ex Tax:£2.85
Double Countersunk Hardened Twin Threaded Woodscrews plated in Zinc. The twin thread allows for a faster insertion and greater pull out resistance.
Pozi Recess Head - The pozi recess, double countersunk head reduces the likelihood of head shear and assists completion of countersinking.
Twin Thread -..
£3.43
Ex Tax:£2.86
Roofing Felt Nails Galvanised 30 x 2.65 Pack of 125.
Recommended gap between nails is 50mm...
£3.12
Ex Tax:£2.60
Galvanised Round Wire Loose Nail
Mechnically galvanised for external use covering a wide variety of applications.
Used where strength is essential.
Type Round Wire
Finish Galvanised
Length (mm) 100
Product Weight 2.5kg
Diameter 3.75
Size 75 x 3.75..
£13.63
Ex Tax:£11.36
Using the most modern manufacturing methods and design techniques, the C2 is a revolutionary high performance multi-purpose screw. Designed to give ultimate performance in a multitude of materials, the patented twin-cut point gives a consistent and rapid "pick-up" and reduces timber splitting. These..
£26.64
Ex Tax:£22.20
Galvanised Presser Point Staple Nails.
Mechnically galvanised for external use covering a wide variety of applications.
Used for fixing fencing and wire mesh.
Type Presser Point Staples
Finish Galvanised
Length (mm) 40
Product Weight 1kg
Diameter 4.00
Size 40 x 4.00..
£5.32
Ex Tax:£4.43
Double Countersunk Hardened Twin Threaded Woodscrews plated in Zinc. The twin thread allows for a faster insertion and greater pull out resistance.
Pozi Recess Head - The pozi recess, double countersunk head reduces the likelihood of head shear and assists completion of countersinking.
Twin Thread -..
£8.54
Ex Tax:£7.12
Galvanised Round Wire Loose Nail
Mechnically galvanised for external use covering a wide variety of applications.
Used where strength is essential.
Type Round Wire
Finish Galvanised
Length (mm) 65
Product Weight 2.5kg
Diameter 3.35
Size 65 x 3.35..
£13.63
Ex Tax:£11.36
Reisser R2 pozi countersunk passivated woodscrews have been trusted for over 30 years to give consistent performance in all timbers and board materials. The 25º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique REISSER lub..
£31.86
Ex Tax:£26.55
The exceptional reliability and strength of the TIMco Classic Multi-Purpose Screw enables the user to rely on one product for a variety of applications. The 25 sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in h..
£12.35
Ex Tax:£10.29
Cut Point Staples Zinc Plated 2.65 x 25mm (1") 25kg box..
£111.76
Ex Tax:£93.13
Using the most modern manufacturing methods and design techniques, the C2 is a revolutionary high performance multi-purpose screw. Designed to give ultimate performance in a multitude of materials, the patented twin-cut point gives a consistent and rapid "pick-up" and reduces timber splitting. These..
£6.10
Ex Tax:£5.08
A domed head bolt with a square anti spin shoulder mainly used for clamping timber or attaching ironmongery to timber.
Hex nut included.
B point for use in pre-drilled shallow holes.
Colour/Plating Zinc
A / F (mm) 17
Thread Ø x Length (mm) M8 x 180
Nut Size M10
Size 8 x 180
..
£1.25
Ex Tax:£1.04
A domed head bolt with a square anti spin shoulder mainly used for clamping timber or attaching ironmongery to timber.
Hex nut included.
B point for use in pre-drilled shallow holes.
Colour/Plating Zinc
A / F (mm) 17
Thread Ø x Length (mm) M10 x 150
Nut Size M10
Size 10.0 x 150
..
£1.62
Ex Tax:£1.35
A domed head bolt with a square anti spin shoulder mainly used for clamping timber or attaching ironmongery to timber.
Hex nut included.
B point for use in pre-drilled shallow holes.
Colour/Plating Zinc
A / F (mm) 17
Thread Ø x Length (mm) M10 x 150
Nut Size M10
Size 10.0 x 150
..
£0.66
Ex Tax:£0.55